AV.io SDI+ overview

AV.io SDI+ Overview

The AV.io SDI+ is a rugged UVC plug and play SDI to USB capture card with 3.5mm analog audio input that supports input and output of resolutions up to 1080p at 60 frames per second. No installation of drivers is required for any modern OS and advanced settings can be applied to the AV.io SDI+ that persist between workstations. AV.io SDI+ USB output is an uncompressed, chroma subsampled signal with almost zero latency. The 3.5mm analog audio input supports mic and line level analog audio and can be utilized in the USB output with or without embedded SDI audio. The AV.io SDI+ does not support multi-channel SDI audio, only the first two channels. Windows, Mac, and Linux are supported, and in theory any OS with UVC drivers but only a Windows can run the AV.io SDI+ config tool. All firmware updates and configuration changes to the AV.io SDI+ must be made with a Windows computer first. The AV.io SDI+ supports renaming of the AV.io SDI+ and this naming persists between computers and systems.