5 PTZ Control:

Note: All PTZ sensitivity/speeds used by the module are independent of the speeds set on the camera’s web UI. If the PTZ speed signals are not used, the corresponding PTZ sensitivity feedback signals will indicate the “Default” value the module uses, which has been tested as a reasonable default for most use cases. Should a custom P/T/Z speed be needed, the corresponding PTZ sensitivity signals can be set before the camera connects – simply drive them with an Analog Initialize at program start (or during your program startup sequence as desired). Inputs: Name Type Description Tilt_Up Digital Press and hold to tilt the camera up. Tilt_Down Digital Press and hold to tilt the camera down. Pan_Left Digital Press and hold to pan the camera left. Pan_Right Digital Press and hold to pan the camera right. Zoom_In Digital Press and hold to zoom the camera in. Zoom_Out Digital Press and hold to zoom the camera out. Home Digital Set the camera to the home position on a rising edge PanTilt_UpLeft Digital Press and hold to pan and tilt the camera up and to the left. PanTilt_UpRight Digital Press and hold to pan and tilt the camera up and to the right. PanTilt_DownLeft Digital Press and hold to pan and tilt the camera down and to the left. PanTilt_DownRight Digital Press and hold to pan and tilt the camera down and to the right. Pan.Speed Analog Sets the sensitivity of the pan controls. Values used are 1- 24, where 24 is the fastest movement and 1 is the slowest. Tilt.Speed Analog Sets the sensitivity of the tilt controls. Values used are 1- 20, where 20 is the fastest movement and 1 is the slowest.

-- 10 of 20 --

Signal Map 1 1 Zoom.Speed Analog Sets the sensitivity of the zoom controls. Values used are 1-7, where 7 is the fastest movement and 1 is the slowest. Feedback: Name Type Description Pan.Speed.Feedback Analog The current pan speed sensitivity Tilt.Speed.Feedback Analog The current tilt speed sensitivity Zoom.Speed.Feedback Analog The current zoom speed sensitivity

-- 11 of 20 --

Signal Map F o c u s C o n t r o l : 1 2