EC20 ceiling mount installation

You should have received the following in the box for the EC20:

1 × Ceiling mount

7 × M3×6 pan head self-tapping screws

You will also need 4 × M5 expansion screws, choose a type and length for the ceiling to which you're mounting the camera.

These expansion screws are not included.

Important: Installer must ensure the mount and camera are securely fastened with proper anchors for the ceiling type.

Ceiling Mount Installation Steps

• Mark and Drill

• Hold the top plate of the mount to the ceiling and mark the hole.

• Drill holes. Check the depth, you can use a toothpick or straw to match your screws.

• Attach top plate

• Align the top plate with your marks.

• Secure using 4 × M5 expansion screws (not included).

• Prepare camera

• Attach the lower mount plate to the camera with the included M3×6 screws.

• Mount camera

• Lift camera with plate into the ceiling mount.

• Secure with M3×6 screws.

• You're done!

The above installation diagram is for reference only, please refer to actual product for the installation accessories.