EC20 feature list

Below you'll find a brief overview of the various features of the Epiphan EC20 PTZ Camera. For more information on a particular feature please follow the links to the relevant section of the user guide.

AI Tracking

• The EC20 camera is equipped with a powerful AI computing chip, it uses advanced AI algorithms to realize monocular humanoid tracking, with this you can perform automatic tracking of scenes such as education, conferences and live broadcasts.

NDI|HX3

• NDI|HX3 video signals generally have low delay and are easy to set up, allowing for more convenient project implementation and deployment. It has wide compatibility and supports the simultaneous transmission of audio, video, and control commands. It's a new generation of network video transmission!

4K UHD

• The EC20 uses a 1/1.8-inch high-quality UHD CMOS sensor with a maximum of 8.42 million pixels and can capture 4K (3840x2160) ultra-high-resolution high-quality images. It's also compatible with 1080p, 720p, and many other lower resolutions.

20x Optical Zoom

• Using its 4K ultra long focal lens with high quality and 8 million ultra-high resolution, the EC20 is capable of up to 20x optical zoom with a maximum field angle of 60°.

HDMI 2. 0

• The EC20 uses an HDMI 2.0 interface, which can directly output uncompressed digital video up to 4KP60!

Low Light

• Through the use of a 3D noise reduction algorithm the EC20 greatly reduces image noise. Even under ultra-low light conditions, it keeps the picture clean and clear! The Signal to Noise Ratio (SNR) of the image is as high as 55dB.

Multiple Interfaces

• With HDMI 2.0, 3G-SDI HD, USB, and network outputs the EC20 can simultaneously output up to three HD digital signals.

Multiple Control Methods

• The EC20 can be controlled using a variety of control systems (Crestron, Extron, QSYS, etc.), including RS232, REST API, RS485, network, and USB.

Control Modules

• Epiphan certified control modules are available for the EC20 for Crestron and QSYS control systems. For Extron control systems, Extron publishes its own EC20 driver.

Tally Light Control

• The EC20's built-in tally light can be turned on or off and set to red or green directly from the web interface, without a third-party controller. It can also follow Panopto recording state automatically.

Gravity Sensor

• It supports automatic image flipping function based on gravity sensor detection.

Epiphan Edge

• EC20 PTZ Camera can be paired with Epiphan Edge and managed alongside your Pearls.

• Monitor health, update firmware, and remotely access from any browser, without touching the rack.

Panopto Remote Recorder

• Native integration with Panopto enabling the EC20 PTZ Camera to register with and record and/or stream directly to Panopto Video CMS.

Dante Audio Input

• EC20 PTZ Camera accepts Dante audio directly. Sound from ceiling mics, lavaliers, and mixers already on your Dante network flows straight into the camera. The EC20 supports two channels (one stereo pair) of Dante audio input. The EC20 does not support Dante output, and does not support Dante video.

EC20 interface and switches

This page provides an overview of the physical switches and features of the EC20. The EC20 supports both RS-485 and RS-232.