# EC20 quick start

- Power on your camera, there are two options:

- DC power – Plug in the DC power cable and flip the power switch

- Power Over Ethernet Plus (PoE+) – Just connect a PoE+ cable to provide power and network access to the camera in one cable, and don’t forget to flip the power switch

- Connect to your network (optional but recommended):

- Network access unlocks the full feature set of the EC20 through its web interface.

- Plug in an Ethernet cable from your network to the EC20. The camera uses DHCP by default, so most networks will automatically assign it an IP address.

- Reboot the camera to apply changes

- The updated IP address will appear on the front LCD screen. The default static IP is 192.168.100.88.

- The default username is **admin**

- The default password is **admin**

### Choose how to set up the EC20 camera

**Remote control**

- Insert AAA batteries (not included)

- Point the remote at the camera to pan, tilt, zoom, set presets, and more

- Connected monitor

- Connect a monitor to the camera’s HDMI port

- Once connected, you’ll see the camera image on the monitor

- Use the remote to open the on-screen display (OSD) menu

- Navigate the menu with the remote to adjust settings

**Use the Web UI**

- Make sure the camera is connected to the same network as your computer

- Open a browser and enter the camera’s IP address (See previous section “Connect to your network”)

- Log in using:

- Username: **admin**

- Password: **admin** (or your updated credentials)

### Connect the EC20 to a video system or CMS

- Use hardwired connections:

- SDI

- HDMI

- USB

- Stream video over the network using a number of different protocols:

- NDI | HX

- SRT

- RTSP

- and more!

**What's in the Box?**

When you receive your EC20 PTZ Camera you should find the following in the box:

1 x Epiphan EC20 PTZ Camera

1 x Remote Control

1 x Power Adapter

4 x Power Cables (AUS/EU/UK/US)

1 x Setup Guide

1 x Ceiling mount bracket and required screws

1 x Wall mount bracket and required screws

If there's something missing please contact us at support@epiphan.com.

**Installation**

Here you can find instructions for installing the EC20 on a ceiling, wall, or other location.

> product: ec20 · topic: overview · source: ec20-userguide.md · updated: Oct 7, 2026