# EC20 web interface overview

The EC20 web interface is the browser-based control panel for the camera. The web interface is accessible using a browser on the same local network as the EC20, simply enter the IP address of the camera into the address bar. The default login credentials are:

**username:** admin

**password:** admin

Once you're logged in you should see a video player showing what the camera is seeing, this is the **Live View** page. On the left is a navigation bar for accessing other sections of the interface. For information on certain interfaces please check the relevant user guide section.

**Live View**

- This shows the current shot of the camera, you can make the image full screen, mute the audio, or pause the video stream.

- This page also displays all presets currently saved on the camera. You can call presets from here, as well as update existing presets and create new presets.

**Device Info**

- This page shows some system information about your EC20.

- Device ID: This is the name the camera will display in other applications. You can modify this.

- Hardware Type: This is the internal hardware name.

- Software Version: This is the current firmware version, and the version of the latest firmware with option to update to that version using over the air upgrade.

- Webware Version: This is the current version of the web interface, this is set via firmware updates.

- Serial NO.: The serial number of this EC20.

**Video**

- Modify various settings related to the visual appearance of the video signal.

**Audio**

- Modify the different audio settings.

**Output**

- Modify different aspects of the physical and network based video outputs.

**Tracking**

- Modify settings related to the automatic tracking feature.

**System**

- Access system settings, upload and apply firmware updates, modify user passwords, turn the front LED screen on or off, and configure the barrel tally light.

**Network**

- Modify different network configuration settings, such as NTP or network ports used.

**NDI®**

- Modify certain settings and get other information relating to NDI®.

**Overlays**

- Modify settings related to the title and timestamp video overlays for your video streams.

**Panopto**

- Manage the Panopto integration, including registering the EC20 with Panopto as a Remote Recorder and viewing the Events calendar.

**Epiphan Edge**

- Enable Epiphan Edge, select your region, and pair the EC20 with your Epiphan Edge team.

A **Log Out** link is available in the upper-right corner of the web interface.

Below the navigation tabs you'll find some controls. The small house surrounded by arrows allows you to control the pan and tilt functions of the camera, while the magnifying glasses control the zoom. Note that while tracking is enabled these controls will be disabled.

Below the PTZ controls is the **Presets** panel. Presets let you save and recall specific camera positions. The panel shows how many presets are saved out of the maximum, for example **Total 3 / 50**, and displays a thumbnail preview of each saved preset so you can see the shot before calling it.

The thumbnail is a static snapshot of the location the camera was facing at the moment the preset was created. Thumbnails do not update dynamically, so a thumbnail does not reflect the current live image.

From this panel you can:

- **+ Set preset** — save the camera's current position as a new preset.

- **Call** — move the camera to the preset selected in the drop-down list.

- **Update** — overwrite the selected preset with the camera's current position.

- **Clear all** — delete every saved preset.

Further down at the bottom are the Tracking settings. You can toggle tracking on and off, toggle the "tracking hint" that displays in the output to show when tracking is enabled or disabled, as well as set the Mode.

> product: ec20 · topic: overview · source: ec20-userguide.md · updated: Oct 7, 2026