Using the EC20 remote control
You can control a number of different features using the included remote control. See below for a diagram outlining what each button does.
| (Standby) Key: Enter standby mode Number Keys: To set preset or call preset * Key: Use with other keys PRESET Key: Set preset: [PRESET] + Number key (0-9) HOME Key: Confirm selection or turn PTZ back to the middle position (Return) Key: Return to the previous menu ZOOM Keys: SLOW: Zoom In [+] or Zoom Out [-] slowly FAST: Zoom In [+] or Zoom Out [-] fast L/R SET Key: Standard: [L/R SET] + [1] Reverse: [L/R SET] + [2] FOCUS Keys: Auto/Manual/Far-end/Near-end focus CAMERA SELECT Keys: Select and control the camera # Key: Use with other keys Auto Tracking Keys: [F1]: Disable [F2]: Disable [F3]: Enable AI Tracking [F4]: Disable AI Tracking RESET Key: Clear preset position: Successively press [RESET] + Number key (0-9) PTZ Control Keys: PTZ moved according to the arrow direction MENU Key: Enter OSD menu or back to previous menu BACKLIGHT Key: Backlight ON/OFF: Toggle backlight Only supported in auto exposure mode P/T RST (PTZ Reset) Key: Reset Pan/Tilt self-test |
|---|
Shortcut Set: Press these key combinations to apply certain settings quickly. Press the keys one at a time in the sequence below.
[#] + [*] + [F4]: Enable or disable the Image Freeze
[*] + [#] + [1]: OSD menu language to English
[*] + [#] + [3]: OSD menu language to Chinese
[*] + [#] + [4]: Display current IP address
[*] + [#] + [6]: Quickly recover the default (Factory reset?)
[*] + [#] + [8]: Check the camera version
[*] + [#] + [9]: Enable vertical image flip
[*] + [#] + [MANUAL]: Restore to default IP address