Power down and system restart

You can do the following to power off Pearl-2 or reboot the device:

• Choose Reboot or Shutdown Now from the Maintenance page using the Admin panel.

• Power off the device using the power button.

Reboot the device using the Admin panel

• Log in to the Admin panel as admin.

• From the Configuration menu, click Maintenance. The maintenance page opens.

• Under the Maintenance section, select Reboot Now and click OK when prompted.

Power off the device using the Admin panel

You can use the Admin panel to power off Pearl-2. The power button on Pearl-2 is a toggle switch. If you power off the device using the Admin panel, the power switch remains in the on state. To power back on, you must double press the power button.

• Log in to the Admin panel as admin.

• From the Configuration menu, select Maintenance. The maintenance page opens.

• Under the Maintenance section, select Shutdown Now and click OK when prompted.

Power off the device using the power button

You can manually shut down Pearl-2 using the power button.

The power button for Pearl-2 is found on the front.

To power off Pearl-2 manually, double-press (two successive fast presses and releases) the power button to initiate a safe power down.

If the system is unresponsive, press and hold the power button for 4 seconds to force an immediate power down.