Add a custom No Signal image

Applies to: Pearl-2, Pearl Mini, Pearl Nexus, Pearl Nano

By default the system displays a No Signal image when there is no video signal coming in to any of the video input ports on the device. You can customize this image to display a different message to your viewers. For example if a viewer logs in early, or if you are experiencing delays you could indicate the start time (or expected resolution time) using the no signal image.

Before you can specify a custom No Signal image for an input port, you must upload the image.

Set the no signal image for an input port using the Admin panel

• Log in to the Admin panel as admin.
• From the Inputs menu, click the source name. The configuration page for the source opens.
• In the "No signal" image section, select an image from the Image drop down list.
• In the Timeout field, enter the number of seconds before the No Signal image is displayed. If no manual value is entered, the default time to display is 5 seconds.
• Click Apply.
• Test that the No Signal image is correctly applied by disconnecting your source and previewing the channel(s) containing said source.

Device differences

• Pearl Nano: single-channel — the final test step reads "...previewing the Channel containing said source" (singular).