Apply a configuration preset using the Admin panel
Applies to: Pearl-2, Pearl Mini, Pearl Nexus, Pearl Nano
When you apply a configuration preset, the system settings for all included configuration groups are updated. Other settings on the system are not affected. For example if you apply a preset that includes the configuration groups channels and automatic file upload, your network settings, passwords, time server, source configurations, etc are not modified. Similarly, if you apply a configuration preset that has only network settings included, only the network settings change.
If you apply a preset that has the network or system configuration group, a reboot is required. If you apply a preset that has the EDID configuration group, the system may appear unresponsive for a short time while it applies these EDIDs to the video grabbers.
You can verify which configuration groups are included in a preset by looking at the list to the right of the configuration preset name. The term 'all' means all groups are included. Otherwise groups are listed individually.
You may apply multiple presets one after another. If you apply two (or more) configuration presets that include a particular configuration group, the settings (for that group) from the last applied preset are the active settings. In short, last in wins.
Apply a configuration preset using the Admin panel
- Log in to the Admin panel as admin.
- From the Configuration menu, click Maintenance. The maintenance page opens.
- In the Configuration presets section, select which sections of the configuration you wish to apply. For example, if you have imported a configuration preset and don't want to apply the Network section, clear the Network check box for the configuration preset. If you want to apply all of the sections, skip to the next step.
- Click Apply selected below the configuration preset you want to apply.
- Click OK when prompted. The device reboots automatically if the configuration preset includes the network or system configuration groups.
Device differences
- Pearl Nano: has a single channel, so the "channels" configuration group is referred to as "Channel (single channel on Nano)" in this context.