Run diagnostic tests using the Admin panel

Applies to: Pearl-2, Pearl Mini, Pearl Nexus, Pearl Nano

Using the Admin panel, you can access useful diagnostic tools from the Configuration menu when you select Network.

Available diagnostic tools:

• Connectivity status: Display the status of critical network connections
• Ping: Test if the device can reach a specified destination server on the network. Not all networks support ping.
• Trace route: Trace the route that packet traffic takes to get from the device to a specified destination server on the network. Not all networks support traceroute.
• Bandwidth test: Display the available upload and download bandwidth speed in Mbps up to a maximum bandwidth of 1000 Mbps.
• Domain name resolution: Confirm that the device can resolve a Fully Qualified Domain Name (FQDN) using the DNS server that is configured for it.
• Probe: Check if the device can establish communication to a specific port on a network host using a network protocol that you specify. Supported network protocols are: TCP, HTTP, HTTPS, RTSP, RTMP, and RTMPS.

To troubleshoot networking issues yourself, try to ping the IP address of your device or do a traceroute to a server such as 8.8.8.8. If you are unable to resolve your networking issues, contact your network administrator and provide them the IP address and MAC address of your device or contact Epiphan support.

Run diagnostics using the Admin panel

• Log in to the Admin panel as admin.
• From the Configuration menu, select Network. The Network configuration page opens.
• In the Network diagnostics section, select the diagnostic test to run from drop down.
• If Connectivity status is selected, the results display after you click Start.
• If Ping is selected, enter the destination server IP address or domain name before clicking Start.
• If Trace route is selected, enter the destination server IP address or domain name to route trace before clicking Start.
• If Bandwidth test is selected, the measured upload and download bandwidth displays after you click Start.
• If Domain name resolution is selected, enter the IP address or server name to resolve before clicking Start.
• If Probe is selected, choose the transport protocol from the drop-down menu and then enter the destination server IP address or server name along with the port before clicking Start. For example, enter: 10.100.10.1:1234 or domain.example.com:1234
• Click Start.

Device differences

• Pearl Nexus, Pearl Nano: The Connectivity status tool also reports the status of 802.1x network security features ("Display the status of critical network connections and features like 802.1x").
• Pearl-2, Pearl Mini: The Connectivity status tool description does not mention 802.1x.