Configure a video input source

Captured video sources don't usually need configuration, but you can change some of the video settings using the Admin panel, including:

Pearl Nano does not support USB video input, so USB video and web camera settings do not apply.

Open the configuration page for an input source using the Admin panel

Log in to the Admin panel as admin.
Ensure a source is connected to the input port,
From the Inputs menu, click the source name. The configuration page for the source opens.

Video settings

Value	Input type	Description
Scaling (Pearl Nano)	HDMI, DVI, SDI	Use this setting to scale the video input source. This is useful when adding multiple video sources in a custom layout such as picture in picture or side-by-side. The frame size selected for the video source is also what gets sent out the HDMI OUT port when you select the video input as the output source.
Image	HDMI, DVI, SDI	This menu allows you to choose a custom no-signal image for the channel. The drop-down list gives you the option to choose the default image or any image you have uploaded through the Add a custom No Signal image
Timeout	HDMI, DVI, SDI	The timeout represents the number of seconds after losing the signal that the no-signal is displayed. You may change this number to adjust how soon you wish the no-signal image to appear after the signal disappears.

SDI video settings

The following options are available for signals via the SDI port.

Value	Description
Scaling	Use this setting to scale the video input source. This is useful when adding multiple video sources in a custom layout such as picture in picture or side-by-side. The frame size selected for the video source is what gets sent out the HDMI OUT port.
Image	This menu allows you to choose a custom no-signal image for the channel. The drop-down list gives you the option to choose the default image or any image you have uploaded through the Add a custom No Signal image
Timeout	The timeout represents the number of seconds after losing the signal that the no-signal is displayed. You may change this number to adjust how soon you wish the no-signal image to appear after the signal disappears.