Configure AFU to CIFS server parameters
You can automatically upload recordings to a CIFS server (also known as SMB or samba) when you select CIFS as the AFU protocol transfer type using the Admin panel. SMB2 and SMB3 are supported.
The following table describes the parameters to configure AFU to a CIFS server.
Table 21 CIFS Automatic File Upload Configuration Parameters
| Name | Description |
|---|---|
| Server Port | The CIFS server port. Leave blank to use the default port, or enter the port used for your CIFS server. |
| Server address | The IP address (or fully qualified domain name) of the CIFS server. |
| Server share | The name of the shared folder on the CIFS server. |
| Domain | The CIFS server's Windows domain or Work Group name . Needed if the server is part of Active Directory or a Domain Controller. |
| Login | Username for the CIFS server. |
| Password | Password for the CIFS user. |
| Use temp file | Causes files to be named with .part extension on the server during active upload. When the upload completes, the file is renamed to the appropriate extension (.mov, .mp4, .ts or .avi). |
Prerequisites
Channels and recorders are already added for AFU, see Set channels to include in AFU .
AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options.
Configure AFU upload to a CIFS server using the Admin panel
From the Automatic File Upload configuration page, select **CIFS Client **as the protocol transfer type.
Specify the target Server address.
Enter the target Server port, if you have configured the server to use something non-standard. Leave this value blank to use the default port.
Specify the Server share. This is the CIFS share name or the name of the shared folder on the server. If needed, request this value from the network administrator.
If the system is in a different domain than the server or if it is part of Active Directory, enter the **Domain name **of the CIFS server.
Specify a username for the CIFS Server in the **Login **field. The user must have write permissions for the share folder.
Specify the password for the user in the **Password **field; the value is masked by dots.
Select **Use temp file **to name files with a temporary filename extension (.part) on the server until upload is complete.
Click Apply