Configure AFU to RSync server parameters
You can automatically upload recordings to an RSync server when you select RSync as the AFU protocol transfer type using the Admin panel.
The following table describes the parameters to configure for AFU to an RSync server.
Table 20 RSync Automatic File Upload Configuration Parameters
| Name | Description |
|---|---|
| Server address | The IP address (or fully qualified domain name) of the RSync server. |
| Server module | The name of the shared folder on the RSync server. |
| Login | Username for the RSync server. |
| Password | Password for the RSync user. |
| Checksum | Select to enable checksum checking during file transfer. This increases the time taken to transfer, but also increases reliability of the transfer. |
Prerequisites
Channels and recorders are already added for AFU, see Set channels to include in AFU .
AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options.
Configure AFU upload to an RSync server using the Admin panel
From the Automatic File Upload configuration page, select **RSync Client **as the protocol transfer type.
Specify the target Server address.
Specify the Server module. This is the name of the shared folder on the server. If needed, request this value from your network administrator.
Specify a username for the RSync Server in the **Login **field. The user must have write permissions for the module.
Specify the password for the user in the **Password **field; the value is masked by dots.
(Optional) Select the **Checksum **check box to add a checksum validation to the transfer between the system and the recipient server.
Click Apply.