# Configure AFU to WebDav server parameters

You can automatically upload recordings to a WebDav server when you select WebDav as the AFU protocol transfer type using the Admin panel.

The following table describes the parameters to configure AFU to a WebDav server.

**Table 24 WebDav Automatic Upload Configuration Options**

| **Name** | **Description / Options** |
| --- | --- |
| Server address | The IP address (or fully qualified domain name) of the FTP server. |
| Server port | The port used by the target WebDav server. Standard port is 21. |
| Login | Username for the WebDav server. |
| Password | Password for the WebDav user. |
| Enable HTTPS | Select if you need to use a secured HTTPS link to the WebDav server. |
| Use temp file | Causes files to be named with .part extension on the server during active upload. When the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or .avi). |

**Prerequisites**

- Channels and recorders are already added for AFU, see Set channels to include in AFU .

- AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options.

**Configure AFU upload to a WebDav server using the Admin panel**

- From the Automatic File Upload configuration page, select **WebDav Client **as the protocol transfer type.

- Specify the target **Server address**.

- Specify the **Server Port** used for the target WebDav server. The standard port is 21.

- Enter the FTP account username in the **Login **field.

- Enter the FTP account password in the **Password **field. The characters are masked with dots.

- Select **Enable HTTPS** if you need a secure HTTPS link to the WebDav server.

- Select **Use temp file **to name files with a temporary filename extension (.part) on the server until upload is complete.

- Click **Apply**.

> product: unify · topic: recording · source: unify-userguide.md · updated: Oct 7, 2026