EC20 quick start

• Power on your camera, there are two options:

• DC power – Plug in the DC power cable and flip the power switch

• Power Over Ethernet Plus (PoE+) – Just connect a PoE+ cable to provide power and network access to the camera in one cable, and don’t forget to flip the power switch

• Connect to your network (optional but recommended):

• Network access unlocks the full feature set of the EC20 through its web interface.

• Plug in an Ethernet cable from your network to the EC20. The camera uses DHCP by default, so most networks will automatically assign it an IP address.

• Reboot the camera to apply changes

• The updated IP address will appear on the front LCD screen. The default static IP is 192.168.100.88.

• The default username is admin

• The default password is admin

Choose how to set up the EC20 camera

Remote control

• Insert AAA batteries (not included)

• Point the remote at the camera to pan, tilt, zoom, set presets, and more

• Connected monitor

• Connect a monitor to the camera’s HDMI port

• Once connected, you’ll see the camera image on the monitor

• Use the remote to open the on-screen display (OSD) menu

• Navigate the menu with the remote to adjust settings

Use the Web UI

• Make sure the camera is connected to the same network as your computer

• Open a browser and enter the camera’s IP address (See previous section “Connect to your network”)

• Log in using:

• Username: admin

• Password: admin (or your updated credentials)

Connect the EC20 to a video system or CMS

• Use hardwired connections:

• SDI

• HDMI

• USB

• Stream video over the network using a number of different protocols:

• NDI | HX

• SRT

• RTSP

• and more!

What's in the Box?

When you receive your EC20 PTZ Camera you should find the following in the box:

1 x Epiphan EC20 PTZ Camera

1 x Remote Control

1 x Power Adapter

4 x Power Cables (AUS/EU/UK/US)

1 x Setup Guide

1 x Ceiling mount bracket and required screws

1 x Wall mount bracket and required screws

If there's something missing please contact us at support@epiphan.com.

Installation

Here you can find instructions for installing the EC20 on a ceiling, wall, or other location.