EC20 safety information

Below you can find important safety information for your EC20, please read this before operating!

• During the installation and use of the equipment, all electrical safety regulations of the country and region of use must be strictly observed.

• Please use the power adapter that comes standard with this product.

• Please do not connect multiple devices to the same power adapter (exceeding the capacity of the adapter may generate excessive heat or cause a fire).

• Do not rotate the head of the camera by hand, this can cause a mechanical failure.

• When installing this product on a wall or ceiling, make sure the device is secure. When installing, make sure that there are no obstacles within the rotation range of the gimbal; do not turn on the power until all installations are completed.

• To avoid heat build-up, make sure there is adequate ventilation around the device.

• If the device emits smoke, smells, or makes noises, please turn off the power immediately, unplug the power cord, and contact the dealer.

• This device is not waterproof, please keep the device dry.

• This product has no user serviceable parts, damage caused by disassembly by the user is not covered by the warranty.

Specific electromagnetic frequencies may affect the image of the camera.

Controlling Your EC20

You can control the EC20 through a number of different methods.

Using the web interface.

Using the Remote Control.

Using a number of different external control protocols, such as NDI, ONVIF, REST API, or VISCA: