Configure AFU to WebDav server parameters
You can automatically upload recordings to a WebDav server when you select WebDav as the AFU protocol transfer type using the Admin panel.
The following table describes the parameters to configure AFU to a WebDav server.
Table 24 WebDav Automatic Upload Configuration Options
| Name | Description / Options |
|---|---|
| Server address | The IP address (or fully qualified domain name) of the FTP server. |
| Server port | The port used by the target WebDav server. Standard port is 21. |
| Login | Username for the WebDav server. |
| Password | Password for the WebDav user. |
| Enable HTTPS | Select if you need to use a secured HTTPS link to the WebDav server. |
| Use temp file | Causes files to be named with .part extension on the server during active upload. When the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or .avi). |
Prerequisites
Channels and recorders are already added for AFU, see Set channels to include in AFU .
AFU is enabled and the parameters configured, see Enable AFU, schedule, and set options.
Configure AFU upload to a WebDav server using the Admin panel
From the Automatic File Upload configuration page, select **WebDav Client **as the protocol transfer type.
Specify the target Server address.
Specify the Server Port used for the target WebDav server. The standard port is 21.
Enter the FTP account username in the **Login **field.
Enter the FTP account password in the **Password **field. The characters are masked with dots.
Select Enable HTTPS if you need a secure HTTPS link to the WebDav server.
Select **Use temp file **to name files with a temporary filename extension (.part) on the server until upload is complete.
Click Apply.